But I am sorting through terrain for Orc's Drift, and recently found my original bridge model.
As with most of my stuff, it's suffered over the years, but it's easily fixed.
I've also got the outhouse, which needs a few bits sorting and updating.
Painting may be off the table, but this kind of terrain work is fine, in fact, the faster drying time helps when gluing tiles on rooves.
Dwarves test out the new facilities
The Bridge Over the River Canis
Bridges are always useful. They can be objectives and they provide interesting movement choices. Quite apart from it's place in the Orc's Drift campaign, it's a very useful terrain piece to have in the collection.
I originally built the bridge from a card photocopy of the original, reinforced underneath with the thick card that I used to get from my job in printing. Thinner card (about 1mm) forms the coping stones and filler gives the rest of the surfaces some texture.
Over the years one side has broken and is hanging off, help in place only by some of the coping stones.
To repair it I ran a bead of hot glue underneath to hold together and strengthen the internal joints. PVA glue was then used to repair the broken pieces of card coping.
A quick touch up of paint brought the bridge back to full working condition, although I'm not sure if I should add a base. I'm waiting until I've made some river sections before deciding what to do.
and as seen on the battlefield
The Outhouse
Although an outhouse isn't really appropriate for a humano-centric pseudo-Medieval setting, it plays an important role in the inspiration material for Orc's Drift, so it's a must for the game.
That tired looking tiled roof
The model was built on a core of that lovely thick card again. The walls were clad in wooden spills. These were the 80s hobbyist's equivalent of coffee stir sticks, sold in tobacconists (the 80s equivalent of Vape Shops) for lighting pipes (the 80s equivalent of... sorry, I'll stop now).
The roof was tiled with thin card, and looks a bit tired. So I replaced it, using slightly thicker card (mail order card envelopes) this time around. To match the wooden construction I tried to give the effect of wooden shingles by scribing lines to texture the card like wood. You can be the judge of how effective it is.
The updated outhouse, engaged
The Outhouse definitely needs a small base but I'll probably base a number of the buildings at once to keep them consistent.
Both models got a bit of ink staining, Vallejo Game Ink Dark Green, to give an aged look and accentuate some of the textures.
So that's a couple of my old models renovated, and more terrain for the Orc's Drift project, and beyond that, for gaming in general. I'm going to have to build some of the Orc's Drift terrain again, but I've at least one more building that I might be able to restore, though it's in far worse condition than the bridge.
Great start on the terrain upgrade. I think the bridge would be better with a base on either side but you are wise to wait until you know what manner of base texture and colour you will use on it all. I shall look forward to gaming with it all.
ReplyDeleteThanks. It's been a useful exercise.
DeleteBasing depends, among other things, on what I decide on for roads and rivers.
Really cool, sometimes simple elements are the most elegant and useful, I like both of them!
ReplyDeleteThanks. I agree, little bits like these really add to a game.
DeleteThe Orc's Drift pieces are so evocative that I'll have to ge them all done.
Excellent renovations and updates, the added staining brings them to the next level, and do remember the 80's references ! LOL
ReplyDeleteThanks. It was a lot of fun revisiting stuff I made around 40 years ago.
DeleteGlad the 80s references weren't lost on everyone lol.