Tuesday 14 March 2017

Sponge Painting Deadzone Part 2

Last post I started sponge painting a building for Mantic's Deadzone game.
The building should be looking reasonable, but just a bit more effort will make it look a lot better, and this time we get to use a brush as well.
Firstly the stripes.  I can't remember where I first saw this idea, but painting the raised vertical bands on some of the panels really helps by adding a bit of colour.  The test building was yellow, for this one I chose blue.  I try to go for different colours on the board, I think of it as individual owners adding a touch of personality to their otherwise quite drab and uniform buildings.

First mask off around the bits you want to paint.  Masking tape is cheap enough; for this you don't need the really good stuff, save that for airbrushing.  Just make sure it sticks down next to the area to be painted, but if its a bit loose towards the edge, that helps when you peel it off.  If you're careful you can even re use it.
For this I used my Vallejo Game Colours, a dark blue than a lighter blue to catch the edges.

Finally I mixed some VMC Oily Steel with black and painted the bits I wanted to look metal (with a brush!).  These were then highlighted with pure Oily Steel.

Other steps to consider; run very watered down black into the cracks to emphasise the shadows, Sponge (or drybrush) a sandy/dusty colour around the lower edges.
Add posters and/or graffiti.

4 comments:

  1. Replies
    1. Thanks. I could add more, but I think it will do for now. I'd rather get more built than obsess on little details on this.

      Delete
  2. This gives a really good effect- the building looks nicely weathered and almost mouldy/mossy in places.

    ReplyDelete
    Replies
    1. Thanks. The green and reddish brown really help the effect, just plain greys would be a bit bland.

      Delete